V6S Series Sand Making Machine

It is mainly used for crushing materials widely used in building materials, metallurgy, chemical industry, mining, refractory materials, cement, abrasive and other industries.

Applications: Pebble, limestone, granite, basalt, pyroxene, andesite, ore tailings, stone debris artificial sand, quartz, feldspar, calcite, talc, ceramics, marble, dolomite, bauxite, iron ore and so on.

236-720T/HCapacity < 50Max.feeding Size(mm)

+86-13585707741*24-hourWhatsapp/Wechat

Request a Quotation

01Product Brief Introduction

V6S new sand making machine is a crushing equipment with lower unit cost, higher crushing efficiency and intelligent operation control developed by our company based on the original high-performance VSI series and combined with the actual operation of the equipment under different working conditions and the feedback suggestions of the operator. By improving feeding mode, optimizing crushing chamber type, adopting new rotor design, adding lifting device and so on, the machine can significantly reduce the material flow resistance, improve the material passing capacity, reduce the wear rate of wearing parts, improve the energy utilization rate, prolong the maintenance cycle, shorten the maintenance time consumption. Now it has become a representative high performance crushing sand equipment in sand machine.

6x Series Sand Making Machine
6x Series Sand Making Machine
6x Series Sand Making Machine
 

02Product Brief Introduction

  • Large capacity, high yield.

    Feeding mode is improved and easier to adjust; higher spindle speed and greater crushing chamber increased the machine’s capacity in actual production.

  • Lower consumption of wearing parts.

    The optimized crushing chamber makes the best impact angle and reduces friction of wear parts, which directly reduce the cost.

  • Excellent particle shape

    Self-strike crushing principle enables the machine to produce the best particle-shape aggregates.

  • It is easy to maintain because of hydraulic device.

    Hydraulic cover lifting device makes it’s more convenient to inspect and maintain the crushing cavity’s inner parts. Hydraulic lifting device and motor seat adjustment device can significantly reduce downtime.

  • Automatic detection, it’s being safe and reliable.

    The alarm device will give signals if the machine is dysfunctional, then the equipment stop to work quickly to protect the sand making machine.

  • Thin oil lubrication and automatic maintenance

    The most advanced oil lubrication station in China; Two complementary oil pumps and automatic detection of oil, which ensures no oil flow out. Oil cooling and heating device makes sure that the bearing lubrication is always in the best condition, which extends maintain interval and service life of the bearing.

  • Easy to install and operate

    The running vibration is light.

  • One machine is for multiple purposes

    Flexible application. The flexible conversion of "stone-hit-stone" and "stone-hit-iron" crushing principle can be applied not only in traditional quarry enterprises, but also in industrial minerals and professional crushing fields.

6x Series Sand Making Machine

03Working Principle

6x Series Sand Making Machine

Materials are constantly conveyed to the stuff distributing plate of sand making machine and piled up. When crammed the chamber, the materials naturally fall into the hopper. After getting into the rotating impeller, they are accelerated by the high speed rotating impeller, and then shot through the tunnels around the impeller which can be 10 times of gravity acceleration. These materials in high speed crash with those in free falling (stone on stone), and then impact the plate that fixed on the whirlpool cavity (stone on iron). They will be rebounded and repeat the process again, thus the materials are constantly crushed. After impacted for several times in the whirlpool cavity, the crushed materials will be excluded through the bottom discharging hole.

04Technical Parameters

V6S Series Sand Making Machine

Model

V6S-9832

V6S-1250

V6S-1363

V6S-1371

Capacity(T/H)

Center and ring feeding

298-335

520-650

580-720

630-800

Center feeding

236-268

325-400

468-518

485-580

Max. feeding length(mm)

Soft material

<50

<50

<50

<50

Hard material

<45

<45

<45

<45

 Rotation speed(r/min)

1360-1510

1100-1310

980-1180

980-1180

Power of two motors(kw)

160×2

250×2

315×2

355×2

Dimension(mm)

5110×2890×3010

5600×2990×3200

5600×3040×3290

5600×3060×3310

Power source

380V  50Hz

Monitoring range of vibration sensor

0.1-20mm/ continuous and adjustable

Hydraulic lubrication station

Motor power(kw)

2×0.31

Safety

Complementary double pumps ensure oil supply; no oil flow; no-oil-hydraulic-automatic-protection; water cooling; heating boot of motor in winter

Dimension(mm)

820×520×1270

Power of tank heater(kw)

2

05Working Principle

+86-13585707741*24-hourWhatsapp/Wechat

Request a Quotation

Note: the above is the display of finished materials, which can be used for crushing more than 200 kinds of materials at the same time

06There are a wide range of crushers to meet your various needs

V6S Series Sand Making Machine

Capacity:236-720T/H

Learn More

Sand Recovery Device

Capacity:50-880m³/h

Learn More

VSI Series Sand Making Machine

Capacity:60-640T/H

Learn More

Would you like to know the equipment details and quotation?

+86-13585707741*24-hourWhatsapp/Wechat

Request a Quotation

Direct attack on the customer's production site More scene+

Our professional team will reply to you as soon as possible.

©2021 Henan Shanky Machinery Co.Ltd.

WhatsApp

Update cookies preferences